Buttweld Fittings Manufacturer in Congo

PED Approved Manufacturers in Congo And PED Certified Manufacturer in Congo

PED Approved Pipe Fittings Manufacturer is a one of the leading professional Buttweld Fittings Manufacturer in Congo of stainless steel pipe fittings & carbon steel pipe fittings in a complete range of stainless steel & carbon steel grades and sizes.
A Pipe fitting is a weldable Pipe fitting that allows for change of direction of flow, to branch off, reduce Pipe size or attach auxiliary equipment. Forged Steel Pipe fittings are manufactured in accordance with ANSI / ASME B16.9.
Pipe fittings comprise of long radius elbow, concentric reducer, eccentric reducers, and Tees, etc. Pipe stainless steel and carbon steel fittings are an important part of the industrial piping system to change direction, branch off, or mechanically join equipment to the system. Pipe fittings are sold in nominal Pipe sizes with a specified Pipe schedule. Butt-welded fitting’s dimensions and tolerances are defined as per ASME standard B16.9.

One of The Largest Suppliers, Exporters of ANSI/ASME B16.9 Buttweld Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Congo.

What Are Materials Used For Pipe Fittings?

PED Certified Pipe Fittings for Pipe and tubing are most often made from the same base material as the Pipe or tubing being connected, e.g., stainless steel, steel, copper, or plastic. However, any material that is allowed by code may be used but must be compatible with the other materials in the system, the fluids being transported, and the temperatures and pressures inside and outside of the system.
The material with which a Pipe is manufactured often forms the basis for choosing Buttweld fittings. Buttweld fittings are made of the following materials.

Carbon steel

Low-temperature carbon steel

Stainless steel

Malleable iron/ductile iron

Non-ferrous metals

Non-metallic materials

Chrome-molybdenum steel

Alloy Steel

Mild Steel

-normally used for high-temperature service

What Are The Types Of Pipe Fittings?

While there are thousands of specialized Buttweld fittings manufacturers Ahmedabad, some common types of Buttweld fittings which are used widely in piping systems are- (i) elbow, (ii) tee, (iii) cross, (iv) reducer, (v) cap or plug, (vi) union, (vii) coupling, (viii) nipple, etc.

How To Choose Pipe Fittings?

Pipe fittings are to be selected considering certain factors. These factors are given below.

Connection types:– When using Pipe fittings, one is to be aware of the fact that a fitting can have two different connector types. Both the ends can have female threads or one end of the fitting can have female threads while the other end can have male threads. One end may have a male slip while the other end can have threads. They can also have matching ends that can accommodate any requirement.

Materials of construction:– As a rule, the Pipe fitting should be of the same material as the material used in the making of the Pipe in which it is to be fitted. However, in some cases, materials conforming to certain codes or standards can also be used in Pipes of another material.

Check for flow:– To keep the flow of the fluid consistent in the piping system, the ends of Pipe fittings are to be slightly larger than the rest of the Pipe so that they can accommodate connections without narrowing the inner diameter (ID) of the Pipe.

Type of fitting:– Besides Pipe materials, Pipe fittings are identified by the type of fitting such as threaded or slip, male or female.

Size:– When measuring the size of Pipe fittings, it is to be noted that the male threaded fittings are measured to the outside edge or outer diameter (OD), while female fittings are measured to the inside edge of the inlet or ID.

Thickness:– The Pipe fittings are available in a number of different thicknesses or ‘schedules’ in the same way as the Pipes are available.

Design:– Each Pipe or tube is designed to carry certain specific types of fluids, liquids, gases, chemicals under varying conditions. Accordingly, the Pipe fittings are also available in a variety of designs.

Standards and codes:-There are certain standards and codes set by various standard organizations by which the different Pipe fittings are graded. Pipe fittings are selected and used to satisfy these standards.

Buttweld Fittings come in Buttweld & Forged Form. Buttweld Fittings is available either seamless or welded form, which is manufactured in all steel material and metal standards compliances.

MOC For Pipe Fittings?

Pipe fittings are most commonly available in carbon steel, stainless steel, nickel alloy, aluminum, and high yield material. High yield Pipe carbon steel Pipe fittings are available in A234-WPB, A234-WPC, A420-WPL6, Y-52, Y-60, Y-65, Y-70. All WPL6 Pipe fittings are annealed and are NACE MR0157 and NACE MR0103 compatible.

Common Materials for Welded Pipe Fittings:-

Carbon Steel Pipe Fitting

A234 WPB is the most common material used for carbon steel Pipeed fittings.
ASTM A234 WPB is the Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service.

Carbon Steel Pipe Fitting Specifications

ASTM:- A234 WPB

ASME:- B16.9, B.11

NACE:- MRO175

MSS:- SP-83, SP-95

Carbon Steel Pipe Fitting Chemical Composition (%)

Fittings made from a bar or plate may have 0.35 max carbon.

Fittings made from forgings may have 0.35 max Carbon and 0.35 max Silicon with no min.

For each reduction of 0.01% below the specified Carbon maximum, an increase of 0.06% Manganese above the specified maximum will be permitted, up to a maximum of 1.35%.

The sum of Copper, Nickel, Niobium, and Molybdenum shall not exceed 1.00%.

The sum of Niobium and Molybdenum shall not exceed 0.32%.

Stainless Steel Buttweld Fitting

Stainless buttweld fittings are available in 316 and 304 grades.

304 (UNS S30400) / 304L (S30403)/ 316 (UNS S31600) / 316L (S31603)

Stainless Steel Buttweld Pipe Fitting Chemical Composition (%)

Tensile Requirements

Tensile Strength: (KSI) = 60 & 70

Yield Strength: (KSI) = 35 & 25

(KSI converts to MPA {Megapascals} by multiplying by 6.895)

Buttweld Fitting Beveling

All welded pipe fittings have bevelled ends to allow for ease of welding. This bevel allows for full penetration weld in most cases.
There are two types of bevels;-

Plain Bevel

Compound Bevel

One of The Largest Suppliers & Manufacturer, Exporters of ANSI/ASME B16.9 buttweld Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Congo.

ASME / ANSI B16.9 buttweld Pipe Fittings Specifications – Congo

We are Suppliers of all Types of Buttweld Pipe Fittings Products – Congo

---

ASME B16.9 Pipe Fittings Applications – Congo

---

We are renowned & most acclaimed Manufacturer, Suppliers, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of Stainless Steel Pipe Fittings, Carbon Steel Pipe Fittings, Alloy Steel Pipe Fittings, Mild Steel Pipe Fittings, SMO 254 Pipe Fittings, Alloy 20 Pipe Fittings, Inconel Pipe Fittings, Monel Pipe Fittings, Nickel Alloy Pipe Fittings, Hastelloy Pipe Fittings, Titanium Pipe Fittings, Duplex Steel Pipe Fittings, Aluminum Pipe Fittings, Copper Nickel Pipe Fittings etc.

For More Information About Pipe Fittings Please Call +91 9987994248 or Send an Email to sales@fitwelindia.com

Exporting Cities Destinations for Buttweld Fittings