PED Approved Buttweld Fittings are a Piping component that helps in Changes the direction of the flow such as elbows, tees. Changes the size of the pipe such as reducers, reducing tees. Connect different components such as couplings and stop the flows such as Caps. There are different types of pipe fitting used in piping.
We are manufacturers and suppliers of high-quality industrial valves and fittings, We believe in accuracy and quality supply.
PED Certified Buttweld Fittings Manufacturer is specialized in manufacturing and supplying of Carbon Steel Buttweld Fittings since 1991, we manufacture wide range of Stainless Steel Buttweld Fittings such as Carbon Steel Forged 90 Deg Socket weld Elbow, Carbon Steel Forged 90 Deg Screwed-Threaded Elbow, Stainless Steel Forged 45 Deg Socket weld Elbow, Carbon Steel Forged 45 Deg Screwed-Threaded Elbow in Tanzania, Carbon Steel Forged Socket weld Equal Tee, Carbon Steel Forged Screwed-Threaded Equal Tee, Carbon Steel Forged Socket weld Unequal Tee, Carbon Steel Forged Screwed-Threaded Unequal Tee, Carbon Steel Forged Socket weld Half Coupling, Carbon Steel Forged Screwed-Threaded Half coupling, Carbon Steel Forged Socket weld Full Coupling, Carbon Steel Forged Screwed-Threaded Full coupling in Tanzania, Carbon Steel Forged Socket Weld Pipe Outlet Fittings in Tanzania, Carbon Steel Forged Screwed-Threaded Cap etc. As per International standard like ASME/ASTM, we are supplying & exporting Carbon Steel Buttweld Fittings in seamless & welded both forms to more than 60 countries for over 2 decades. Tanzania Buttweld Fittings Manufacturer Offering High Quality, Lower Cost but the best service in Allow Steel Buttweld Fittings, We Have Our Sales Representatives in all the major cities in Tanzania.
One of The Largest Suppliers, Exporters of ANSI/ASME B16.9 Buttweld Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Tanzania.
Tanzania Buttweld Fittings Manufacturer , also known as Buttweld connectors, attach one Buttweld to another in order to lengthen the run or change the flow direction in a plumbing system. These are used to combine, divert or reduce the flow of the water supply, and they come in a variety of sizes to fit the Buttweld they will connect.
The basic purpose of using Buttweld fittings in Buttweld systems is to connect the bores of two or more Buttwelds or tubes. Buttweld fittings are used in piping systems normally :-
While there are thousands of specialized Buttweld Fittings Manufacturer Ahmedabad, some common types of Buttweld fittings which are used widely in piping systems are- (i) elbow, (ii) tee, (iii) cross, (iv) reducer, (v) cap or plug, (vi) union, (vii) coupling, (viii) nipple, etc.
Tanzania Buttweld Fittings Manufacturer are most commonly available in carbon steel, stainless steel, nickel alloy, aluminum, and high yield material. High yield Buttweld carbon steel Buttweld fittings are available in A234-WPB, A234-WPC, A420-WPL6, Y-52, Y-60, Y-65, Y-70. All WPL6 Buttweld fittings are annealed and are NACE MR0157 and NACE MR0103 compatible.
Common Materials for Welded Buttweld Fittings:-
A234 WPB is the most common material used for carbon steel Buttwelded fittings.
ASTM A234 WPB is the Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service.
|
Grade |
C |
Mn |
P |
S |
Si |
Cr |
Mo |
Ni |
Cu |
Others |
|
– |
– |
– |
max |
max |
– |
– |
– |
– |
– |
– |
|
WPB |
0.3 |
0.29-1.06 |
0.05 |
0.058 |
0.1 |
0.4 |
0.15 |
0.4 |
0.4 |
V 0.08 |
|
(1,2,3,4,5) |
max |
– |
– |
– |
min |
max |
max |
max |
max |
max |
Stainless buttweld fittings are available in 316 and 304 grades.
|
C |
Cr |
Mn |
Ni |
P |
S |
Si |
|
MAX |
– |
MAX |
– |
MAX |
MAX |
MAX |
|
0.035 |
18.0- 20.0 |
2.00 |
8.0-13.0 |
0.045 |
0.030 |
1.00 |
All welded Buttweld Fittings have bevelled ends to allow for ease of welding. This bevel allows for full penetration weld in most cases.
There are two types of bevels;-
One of The Largest Suppliers & Manufacturer, Exporters of ANSI/ASME B16.9 buttweld Fittings – Elbow, Tee, Reducer, Bend, Cross, End Caps, Stub End, Lap Joint Stub End, Collar, Swage Nipple at Competitive prices in Tanzania.
| Outside Diameter (OD) | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
|---|---|
| Dimensions | ASME/ANSI B16.9, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313, ASME B16.28 |
| Type | Seamless / Welded / Fabricated – Elbow, Tee, Cross, Reducer, Nipple, Pipe Cap, Stubend, Bend |
| Wall Thickness | SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS / 3mm – 40mm |
| Buttweld Fittingsing Radius | R = 1D, 1.5D, 2D, 3D, 5D, 6D, 8D, 10D |
| Product’s Angle | 0°～180° |
| Value Added Services | Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering |
| Important Grades | ASTM A403 WP 304 / 304L / 304H / 316 / 316L / 317 / 317L / 321 / 310 / 347 / 904L |
| Production Materials | Stainless Steel, Alloy Steel, Carbon Steel, Duplex & Super Duplex Steel, Nickel Alloys, Cupro Nickel, Hastelloy, Titanium, SMO 254, Alloy 20, Inconel |
For More Information About Buttweld Fittings Please Call +91 9987994248 or Send an Email to sales@fitwelindia.com