Pipe End Cap Manufacturer & Suppliers in India

Request a Call Back


Pipe End Cap Manufacturers & Suppliers Mumbai, India, UAE

PED Approved End Cap Manufacturer & Suppliers

PED Certified End Cap Manufacturer & Suppliers

ASME B16.9 Buttweld End Cap

Fit-Wel Industries LLP, is an ISO 9001:2015 certified manufacturer, and supplier of Pipe End Caps that are mass-produced at our extensive in-house manufacturing unit. We have been providing dependable piping solutions for the past three decades. Stainless steel pipe end caps, also known as pipe caps, suggest their function through their name: they act as a seal to the end of a pipe. Their primary function is to waterproof piping networks in addition to resisting chemicals, moisture, and weather. Our pipe end caps have pressure releasing abilities and flexible. We offer threaded ANSI B16.9 Pipe Caps for quick assembly that also avoid the pipe from getting cracked or damaged. Our pipe end caps are available in high-temperature resisting materials, in a variety of colors, finishes, and in a wide array of sizes.

Fit-Wel Industries LLP is a leading manufacturer, supplier, and exporter of Pipe Fittings End Cap which is available in all dimensions, sizes, and prices. Pipe Fitting End Caps are pushed to connect and are also the easiest way to cap off pipelines. They are used for pressure testing, stub outs, and can be installed on both wet or dry pipes. The pipe fitting that covers the end of a pipe is called end cap pipe fitting. The main purpose of Pipe Fitting End Caps is to block off the end in a piping system. Pipe Fitting End Caps are used for connecting pipes of different diameters and are used in various applications like chemicals, oil & gas Industries, cement & shipbuilders, construction, etc.

Fit-Wel Industries LLP is a manufacturer of Buttweld Fittings and supply high-quality ANSI / ASME b16.9 Buttweld End Cap which is offered to you at the best prices in the market. The End Cap is manufactured in all standard dimensions. Buttweld fittings end caps are tested and verified for durability, accuracy, and precision.
Buttweld end cap is a sort of pipe fitting which covers the end of a tube. As it may have female threads, then it can twist into the end of this tube. Additionally, it may be welded on to near the conclusion of the pipe. On a weld, even if it's a temporary near, or the builder would like to increase the piping system, later on, they should allow extra pipe prior to closure so that the pipe cap may be cut off along with the pipe system long as necessary. This way you won't need less pipe in case you require and the brand new fitting could be attached properly

What is Pipe End Caps?

Pipe End caps or stop ends are commonly used in pipe work to dead end the flow of gas or water. We stock a variety of different types, which are connected slightly differently to one another. Depending on the existing pipe work, you can choose from either brass, copper or plastic in a range if different diameters.
Pipe caps act as protective devices and are also designed to protect the pipe ends of different shapes. The main reason for using pipe caps is to waterproof the connections. They are used to close the ends of pneumatic pipes and tubes or hydraulic. They are also used in the commercial, industrial water supply lines, plumbing apparatus of domestic, machinery and processing equipment, etc. It is also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are most highly demanded as a very important category of pipe fittings.

Features of pipe end caps:

The important specifications that the buyer should consider before enquiring about a bulk purchase of pipe caps.

  • NPT (National Pipe Thread ) size: This feature option is applicable for round shaped caps, wherein the object that has to be protected has a male NPT thread.
  • BSP (British Standard Pipe) size: This size is applicable for round shaped caps only, whereas the object to be capped has a male BSP thread.
  • Diameter: Diameter is the most important dimension that is applicable only for round caps and plugs. In the case of fittings having straight threads, the very important feature to be considered is the major thread diameter. This dimension is not an important issue when the cap, plug, or object to be capped has a tapered (NPT or BSP) thread.
  • Shape: The shape and dimension of pipe caps are the most important points to consider. Pipe caps of various different shapes have different features.
  • Some features Round Caps: The most popular features of round caps are: faceted head, retaining head, or flange, slotted head, knurled and tear tab. A flange is meant for easy removal or additional protection of pipe or tube surfaces. Flanges also helpful to prevent accidental pushing away of the plug through the opening. Slotted caps may be easily installed or removed with the help of using a screwdriver. Knurled or faceted heads are generally designed for threaded caps and plugs only. Knurls or facets offer for hassle-free installation and removal. Pipe caps provided with a tear-tab or strip are very easy to remove.

    • ASME B16.9 Pipe End Caps NPS 1/2 - 48 Dimension

    pipe end cap
    NPS O.D.
    D    		 LENGTH
    H    		 LENGTH
    H1
    1/2 21.3 25 25
    3/4 26.7 25 25
    1 33.4 38 38
    1¼ 42.2 38 38
    1½ 48.3 38 38
    2 60.3 38 44
    2½ 73 38 51
    3 88.9 51 64
    3½ 101.6 64 76
    4 114.3 64 76
    5 141.3 76 89
    6 168.3 89 102
    8 219.1 102 127
    10 273 127 152
    12 323.8 152 178
    14 355.6 165 191
    16 406.4 178 203

    ASME B16.9 Pipe End Caps Dimension Tolerances

    Nominal Pipe Size 1/2 to 2½ 3 to 3½ 4 5 to 8
    Outside Diameter
    at Bevel (D)    		 + 1.6
    - 0.8    		 1.6 1.6 + 2.4
    - 1.6
    Inside Diameter at End 0.8 1.6 1.6 1.6
    Overall Length (H) 3 3 3 6
    Nominal Pipe Size 10 to 18 20 to 24 26 to 30 32 to 48
    Outside Diameter
    at Bevel (D)    		 + 4
    - 3.2    		 + 6.4
    - 4.8    		 + 6.4
    - 4.8    		 + 6.4
    - 4.8
    Inside Diameter at End 3.2 4.8 + 6.4
    - 4.8    		 + 6.4
    - 4.8
    Overall Length (H) 6 6 10 10
    Wall Thickness (t) Not less than 87.5% of Nominal Wall Thickness

    Dimensional tolerances are in millimeters unless otherwise indicated and are equal & except as noted.


    Standard Specification For Buttweld End Cap


    Dimensions : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

    Size : 1/2" (15 NB) to 48" (1200NB)

    Type : Seamless / ERW / Welded / Fabricated

    Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.

    Form : End Caps, Pipe Caps, Pipe End Caps.


    Material & Grades of Buttweld End Cap :

    Stainless Steel Buttweld End Cap :
    ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404

    Duplex & Super Duplex Steel Buttweld End Cap :
    ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462

    Carbon Steel Buttweld End Cap :
    ASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.

    Low Temperature Carbon Steel Buttweld End Cap : ASTM A420 WPL3, A420 WPL6

    Alloy Steel Buttweld End Cap :
    ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

    Nickel Alloy Buttweld End Cap :
    ASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), Titanium (Grade I & II), Cupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.


    ASME B16.9 Buttweld End Cap Available Types

    Buttweld End Cap Butt Weld Pipe Caps
    ASME B16.9 Butt weld End Cap Steel Cap Pipe Fittings
    Stainless Steel End Cap Suppliers SS Buttweld End Caps Fitting
    ANSI B16.9 Buttweld End Cap Dealer ASME B16.28 Buttweld Pipe Cap Exporter
    Welded Butt weld End Caps Stockholder Seamless Butt weld End Cap Distributors
    Carbon Steel End Cap High Quality End Cap Manufacturer
    ASTM A403 Stainless Steel End Caps Duplex Steel Buttweld End Cap
    Super Duplex Steel Buttweld End Cap Copper Nickel End Cap
    High Nickel Alloy End Caps Hastelloy End Caps Stockist
    Titanium Buttweld End Cap Inconel Butt weld End Cap


    Call-09987994248. The global leader in pipe end cap manufactures in India, Mumbai, Ludhiyana, UAE, Dubai, UK of high-quality stainless steel, mild steel, alloy steel, carbon steel material used to manufacturers at factory.

    Other Names: Pipe End Cap, Buttweld End cap, Pipe End Cap Fittings

    Material: Stainless Steel, Carbon Steel, Alloy Steel & High Nickel Grade

    Brand: Fitwel Industries LLP

    Manufacturer: Fitwel Industries LLP

    Suppliers & Exporter: Fitwel Industries LLP

    Rating: 4.7/5 based on 1103 customer reviews

    Stainless Steel Buttweld Pipe End Cap Application

    ASME B16.9 buttweld pipe end cap are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of buttweld pipe end cap through a worldwide network of stock-keeping branches. These buttweld elbows is used in various industries like:

  • Pipe End Cap For Oil & Gas Industries
  • Pipe End Cap For Petrochemical Industries
  • Pipe End Cap For Engineering Industries
  • Pipe End Cap For Chemical Industries
  • Pipe End Cap For Sugar Industries
  • Pipe End Cap For Power Generation Industries
  • Pipe End Cap For Fertilizers Industries
  • Pipe End Cap For Food Processing Industries
  • Pipe End Cap For Polymer Industries
  • Pipe End Cap For Dairy Industries
  • Pipe End Cap For Bio-Pharma Industries

    • Pipe End Cap Manufacturers World Wide

    Below, We are having existence in countries below for Pipe End Cap

    • We are the leading manufacturer and supplier of Pipe End Cap in Dubai & Pipe End Cap in UAE/ United Arab Emirates. Get the best offer for high-quality Pipe End Cap from us in Dubai, UAE. We have plenty of stock of Pipe End Cap in the UAE. Place your order online for Pipe End Cap in Dubai, United Arab Emirates. We are the leading Pipe End Cap manufacturer in Dubai and Pipe End Cap manufacturer in UAE. Get your best quality Pipe End Cap in Dubai. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Singapore. Get the best offer for high-quality Pipe End Cap from us in Singapore. We have plenty of stock of Pipe End Cap in the Singapore. Place your order online for Pipe End Cap in Singapore. We are the leading Pipe End Cap manufacturer in Singapore. Get your best quality Pipe End Cap in Singapore. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Oman. Get the best offer for high-quality Pipe End Cap from us in Oman. We have plenty of stock of Pipe End Cap in the Oman. Place your order online for Pipe End Cap in Oman. We are the leading Pipe End Cap manufacturer in Oman. Get your best quality Pipe End Cap in Oman. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Italy. Get the best offer for high-quality Pipe End Cap from us in Italy. We have plenty of stock of Pipe End Cap in the Italy. Place your order online for Pipe End Cap in Italy. We are the leading Pipe End Cap manufacturer in Italy. Get your best quality Pipe End Cap in Italy. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Qatar. Get the best offer for high-quality Pipe End Cap from us in Qatar. We have plenty of stock of Pipe End Cap in the Qatar. Place your order online for Pipe End Cap in Qatar. We are the leading Pipe End Cap manufacturer in Qatar. Get your best quality Pipe End Cap in Qatar. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Australia. Get the best offer for high-quality Pipe End Cap from us in Australia. We have plenty of stock of Pipe End Cap in the Australia. Place your order online for Pipe End Cap in Australia. We are the leading Pipe End Cap manufacturer in Australia. Get your best quality Pipe End Cap in Australia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in New Zealand. Get the best offer for high-quality Pipe End Cap from us in New Zealand. We have plenty of stock of Pipe End Cap in the New Zealand. Place your order online for Pipe End Cap in New Zealand. We are the leading Pipe End Cap manufacturer in New Zealand. Get your best quality Pipe End Cap in New Zealand. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Saudi Arabia. Get the best offer for high-quality Pipe End Cap from us in Saudi Arabia. We have plenty of stock of Pipe End Cap in the Saudi Arabia. Place your order online for Pipe End Cap in Saudi Arabia. We are the leading Pipe End Cap manufacturer in Saudi Arabia. Get your best quality Pipe End Cap in Saudi Arabia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Bahrain. Get the best offer for high-quality Pipe End Cap from us in Bahrain. We have plenty of stock of Pipe End Cap in the Bahrain. Place your order online for Pipe End Cap in Bahrain. We are the leading Pipe End Cap manufacturer in Bahrain. Get your best quality Pipe End Cap in Bahrain. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in UK. Get the best offer for high-quality Pipe End Cap from us in UK. We have plenty of stock of Pipe End Cap in the UK. Place your order online for Pipe End Cap in UK. We are the leading Pipe End Cap manufacturer in UK. Get your best quality Pipe End Cap in UK. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Austria. Get the best offer for high-quality Pipe End Cap from us in Austria. We have plenty of stock of Pipe End Cap in the Austria. Place your order online for Pipe End Cap in Austria. We are the leading Pipe End Cap manufacturer in Austria. Get your best quality Pipe End Cap in Austria. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Nigeria. Get the best offer for high-quality Pipe End Cap from us in Nigeria. We have plenty of stock of Pipe End Cap in the Nigeria. Place your order online for Pipe End Cap in Nigeria. We are the leading Pipe End Cap manufacturer in Nigeria. Get your best quality Pipe End Cap in Nigeria. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Sudan. Get the best offer for high-quality Pipe End Cap from us in Sudan. We have plenty of stock of Pipe End Cap in the Sudan. Place your order online for Pipe End Cap in Sudan. We are the leading Pipe End Cap manufacturer in Sudan. Get your best quality Pipe End Cap in Sudan. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Egypt. Get the best offer for high-quality Pipe End Cap from us in Egypt. We have plenty of stock of Pipe End Cap in the Egypt. Place your order online for Pipe End Cap in Egypt. We are the leading Pipe End Cap manufacturer in Egypt. Get your best quality Pipe End Cap in Egypt. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Zambia. Get the best offer for high-quality Pipe End Cap from us in Zambia. We have plenty of stock of Pipe End Cap in the Zambia. Place your order online for Pipe End Cap in Zambia. We are the leading Pipe End Cap manufacturer in Zambia. Get your best quality Pipe End Cap in Zambia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Libya. Get the best offer for high-quality Pipe End Cap from us in Libya. We have plenty of stock of Pipe End Cap in the Libya. Place your order online for Pipe End Cap in Libya. We are the leading Pipe End Cap manufacturer in Libya. Get your best quality Pipe End Cap in Libya. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Brazil. Get the best offer for high-quality Pipe End Cap from us in Brazil. We have plenty of stock of Pipe End Cap in the Brazil. Place your order online for Pipe End Cap in Brazil. We are the leading Pipe End Cap manufacturer in Brazil. Get your best quality Pipe End Cap in Brazil. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Chile. Get the best offer for high-quality Pipe End Cap from us in Chile. We have plenty of stock of Pipe End Cap in the Chile. Place your order online for Pipe End Cap in Chile. We are the leading Pipe End Cap manufacturer in Chile. Get your best quality Pipe End Cap in Chile. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in USA. Get the best offer for high-quality Pipe End Cap from us in USA. We have plenty of stock of Pipe End Cap in the USA. Place your order online for Pipe End Cap in USA. We are the leading Pipe End Cap manufacturer in USA. Get your best quality Pipe End Cap in USA. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Mexico. Get the best offer for high-quality Pipe End Cap from us in Mexico. We have plenty of stock of Pipe End Cap in the Mexico. Place your order online for Pipe End Cap in Mexico. We are the leading Pipe End Cap manufacturer in Mexico. Get your best quality Pipe End Cap in Mexico. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Denmark. Get the best offer for high-quality Pipe End Cap from us in Denmark. We have plenty of stock of Pipe End Cap in the Denmark. Place your order online for Pipe End Cap in Denmark. We are the leading Pipe End Cap manufacturer in Denmark. Get your best quality Pipe End Cap in Denmark. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Ukraine. Get the best offer for high-quality Pipe End Cap from us in Ukraine. We have plenty of stock of Pipe End Cap in the Ukraine. Place your order online for Pipe End Cap in Ukraine. We are the leading Pipe End Cap manufacturer in Ukraine. Get your best quality Pipe End Cap in Ukraine. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Peru. Get the best offer for high-quality Pipe End Cap from us in Peru. We have plenty of stock of Pipe End Cap in the Peru. Place your order online for Pipe End Cap in Peru. We are the leading Pipe End Cap manufacturer in Peru. Get your best quality Pipe End Cap in Peru. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Lebanon. Get the best offer for high-quality Pipe End Cap from us in Lebanon. We have plenty of stock of Pipe End Cap in the Lebanon. Place your order online for Pipe End Cap in Lebanon. We are the leading Pipe End Cap manufacturer in Lebanon. Get your best quality Pipe End Cap in Lebanon. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Russia. Get the best offer for high-quality Pipe End Cap from us in Russia. We have plenty of stock of Pipe End Cap in the Russia. Place your order online for Pipe End Cap in Russia. We are the leading Pipe End Cap manufacturer in Russia. Get your best quality Pipe End Cap in Russia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in France. Get the best offer for high-quality Pipe End Cap from us in France. We have plenty of stock of Pipe End Cap in the France. Place your order online for Pipe End Cap in France. We are the leading Pipe End Cap manufacturer in France. Get your best quality Pipe End Cap in France. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Hungary. Get the best offer for high-quality Pipe End Cap from us in Hungary. We have plenty of stock of Pipe End Cap in the Hungary. Place your order online for Pipe End Cap in Hungary. We are the leading Pipe End Cap manufacturer in Hungary. Get your best quality Pipe End Cap in Hungary. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Ethiopia. Get the best offer for high-quality Pipe End Cap from us in Ethiopia. We have plenty of stock of Pipe End Cap in the Ethiopia. Place your order online for Pipe End Cap in Ethiopia. We are the leading Pipe End Cap manufacturer in Ethiopia. Get your best quality Pipe End Cap in Ethiopia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Uganda. Get the best offer for high-quality Pipe End Cap from us in Uganda. We have plenty of stock of Pipe End Cap in the Uganda. Place your order online for Pipe End Cap in Uganda. We are the leading Pipe End Cap manufacturer in Uganda. Get your best quality Pipe End Cap in Uganda. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Belgium. Get the best offer for high-quality Pipe End Cap from us in Belgium. We have plenty of stock of Pipe End Cap in the Belgium. Place your order online for Pipe End Cap in Belgium. We are the leading Pipe End Cap manufacturer in Belgium. Get your best quality Pipe End Cap in Belgium. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Argentina. Get the best offer for high-quality Pipe End Cap from us in Argentina. We have plenty of stock of Pipe End Cap in the Argentina. Place your order online for Pipe End Cap in Argentina. We are the leading Pipe End Cap manufacturer in Argentina. Get your best quality Pipe End Cap in Argentina. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Ecuador. Get the best offer for high-quality Pipe End Cap from us in Ecuador. We have plenty of stock of Pipe End Cap in the Ecuador. Place your order online for Pipe End Cap in Ecuador. We are the leading Pipe End Cap manufacturer in Ecuador. Get your best quality Pipe End Cap in Ecuador. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Uruguay. Get the best offer for high-quality Pipe End Cap from us in Uruguay. We have plenty of stock of Pipe End Cap in the Uruguay. Place your order online for Pipe End Cap in Uruguay. We are the leading Pipe End Cap manufacturer in Uruguay. Get your best quality Pipe End Cap in Uruguay. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Indonesia. Get the best offer for high-quality Pipe End Cap from us in Indonesia. We have plenty of stock of Pipe End Cap in the Indonesia. Place your order online for Pipe End Cap in Indonesia. We are the leading Pipe End Cap manufacturer in Indonesia. Get your best quality Pipe End Cap in Indonesia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in SriLanka. Get the best offer for high-quality Pipe End Cap from us in SriLanka. We have plenty of stock of Pipe End Cap in the SriLanka. Place your order online for Pipe End Cap in SriLanka. We are the leading Pipe End Cap manufacturer in SriLanka. Get your best quality Pipe End Cap in SriLanka. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Vietnam. Get the best offer for high-quality Pipe End Cap from us in Vietnam. We have plenty of stock of Pipe End Cap in the Vietnam. Place your order online for Pipe End Cap in Vietnam. We are the leading Pipe End Cap manufacturer in Vietnam. Get your best quality Pipe End Cap in Vietnam. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Kuwait. Get the best offer for high-quality Pipe End Cap from us in Kuwait. We have plenty of stock of Pipe End Cap in the Kuwait. Place your order online for Pipe End Cap in Kuwait. We are the leading Pipe End Cap manufacturer in Kuwait. Get your best quality Pipe End Cap in Kuwait. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Jordan. Get the best offer for high-quality Pipe End Cap from us in Jordan. We have plenty of stock of Pipe End Cap in the Jordan. Place your order online for Pipe End Cap in Jordan. We are the leading Pipe End Cap manufacturer in Jordan. Get your best quality Pipe End Cap in Jordan. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Netherlands. Get the best offer for high-quality Pipe End Cap from us in Netherlands. We have plenty of stock of Pipe End Cap in the Netherlands. Place your order online for Pipe End Cap in Netherlands. We are the leading Pipe End Cap manufacturer in Netherlands. Get your best quality Pipe End Cap in Netherlands. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Greeces. Get the best offer for high-quality Pipe End Cap from us in Greeces. We have plenty of stock of Pipe End Cap in the Greeces. Place your order online for Pipe End Cap in Greeces. We are the leading Pipe End Cap manufacturer in Greeces. Get your best quality Pipe End Cap in Greeces. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Kenyas. Get the best offer for high-quality Pipe End Cap from us in Kenyas. We have plenty of stock of Pipe End Cap in the Kenyas. Place your order online for Pipe End Cap in Kenyas. We are the leading Pipe End Cap manufacturer in Kenyas. Get your best quality Pipe End Cap in Kenyas. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Algerias. Get the best offer for high-quality Pipe End Cap from us in Algerias. We have plenty of stock of Pipe End Cap in the Algerias. Place your order online for Pipe End Cap in Algerias. We are the leading Pipe End Cap manufacturer in Algerias. Get your best quality Pipe End Cap in Algerias. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Cubas. Get the best offer for high-quality Pipe End Cap from us in Cubas. We have plenty of stock of Pipe End Cap in the Cubas. Place your order online for Pipe End Cap in Cubas. We are the leading Pipe End Cap manufacturer in Cubas. Get your best quality Pipe End Cap in Cubas. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Angolas. Get the best offer for high-quality Pipe End Cap from us in Angolas. We have plenty of stock of Pipe End Cap in the Angolas. Place your order online for Pipe End Cap in Angolas. We are the leading Pipe End Cap manufacturer in Angolas. Get your best quality Pipe End Cap in Angolas. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Canada. Get the best offer for high-quality Pipe End Cap from us in Canada. We have plenty of stock of Pipe End Cap in the Canada. Place your order online for Pipe End Cap in Canada. We are the leading Pipe End Cap manufacturer in Canada. Get your best quality Pipe End Cap in Canada. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

    • We are the leading manufacturer and supplier of Pipe End Cap in Namibia. Get the best offer for high-quality Pipe End Cap from us in Namibia. We have plenty of stock of Pipe End Cap in the Namibia. Place your order online for Pipe End Cap in Namibia. We are the leading Pipe End Cap manufacturer in Namibia. Get your best quality Pipe End Cap in Namibia. Our Pipe End Cap Buttweld Pipe Fittings are manufactures with dissimilar grades of standard ranges and meets its provisions through international and national standards. Steel Pipe end caps butt-weld pipe fitting used for closing the end of a pipe. This is a very thick and strong stainless butt cap & this fitting has a female butt-weld, beveled opening for welding to male connections with a smooth bore. Made of stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, carbon steel, alloy steel, mild steel, Hastelloy, Monel, nickel, Inconel, the lower carbon content of this pipe fitting minimizes harmful carbide precipitation during welding, ensuring corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance. Pipe end caps are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe end caps, consider the application, as this will affect material type, shape, size, and required durability. Steel Dome Pipe Cap is available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
      Worldwide largest Manufacturer of Pipe Fittings End Cap in Duplex Steel, stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Nickel Alloy 200, Monel Steel, Copper Nickel, Alloy 20, Hastelloy, Titanium, Alloy Steel, Mild Steel, Carbon Steel Available in All dimensions.

      Specification of Pipe End Cap

      1. Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
      2. Thickness : Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
      3. Size : Seamless ( 1/2″～24″), ERW / Welded / Fabricated Elbow (1/2″～48″)
      4. Type : Seamless / Welded / Fabricated
      5. Form : Pipe Cap, End Cap, Pipe End Cap
      6. Standard: ANSI/ASME, MSS, JIS, DIN, BS, etc.

      Grade of Pipe End Cap

      1. stainless steel pipe end cap, carbon steel pipe end cap, alloy steel pipe end cap, mild steel pipe end cap, Pipe End Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
      2. Carbon Steel Pipe End Cap: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
      3. Low Temperature Carbon Steel Pipe End Cap: ASTM A420 WPL3, A420 WPL6
      4. Alloy Steel Pipe End Cap: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
      5. Duplex Steel Pipe End Cap : ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Worst-off No. 1.4462
      6. Nickel Alloy Pipe End Cap : ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )


    Coutries & Cities We Serve


    We are renowned & most acclaimed Manufacturer, Suppliers & Exporter And Stockist of Buttweld Pipe End Cap in Stainless Steel & Carbon Steel And Alloy Steel & High nickle Alloy.

    For More Information About Buttweld End Cap Please Call 91-22-2382 9256 or Send an Email to sales@fitwelindia.com

    REQUEST A CALL BACK

    Special Products

    Material